耐福乐(R)弹性地板胶系列|导电地板胶

耐福乐(R)导电弹性塑料地板胶NQ300D

NAFLOR Electric conductivity Adhesive for flooring NQ300D

   主要使 用建筑物内各种导电,抗静电弹性地板(PVC,橡胶)卷材,片材地 板与基础物粘接。

   It can be used in the buildings for electric conductivity , anti - electrostatic bonding for plastic or Rubber sheet and tile to substrate Special for heavy-duty floor. 



施工方法:

o 确认待 涂胶地坪必须清洁、干燥、光滑、平整,水泥地面不起沙。

o 建议使 用专业锯齿刮刀均匀涂刮,待胶晾至半透明,至用手指触摸判断(时间约10- 20分钟)即可铺设地板材料。

o 铺下地板后,用木板 滚筒滚压以排除引入的空气,确保胶 水全部粘结附到地板背面。

Application Instruction:

 o Stir thoroughly the product before use.

 o Apply evenly on the surface of substrate by using A2 ,  A3 toothed trowel. After short open time of 20 - 40min, the substrate is ready to accept above flooring material. 

 o After the flooring material is applied on the substrate rub the surface by wood plate or roller to remove entranced air under the flooring mate-rial. Make sure that adhesive has transferred to the back of the flooring material.


理论涂布量 Theoretical application rate

每公斤涂布6-8平方米。

 

保质期:在1-40℃库房内储存,保质期为12个月。

Quality Grarantee Period:12 months if stored in 1-40℃。


注意事项:

本品在运输,储存和 施工过程中防止严寒及日光暴晒,施工温度不低于5℃。

Notic:

    The product should be protected against frost and direct light  during transportation,  storage and application.  Application temperature should not be lower than 5℃。


友情链接:    五分彩票计划   正版彩票网注册   正版彩票网注册   重庆彩票开户   23彩票计划